TORRANCE, Calif., December 13, 2010 – Toyota Motor Sales (TMS), U.S.A., Inc., today announced that it will conduct a voluntary Safety Recall involving approximately 94,000 2011 Model Year Sienna vehicles produced before early November 2010 to replace the stop lamp (brake light) switch bracket. Due to the proximity of the stop lamp switch bracket to the parking brake pedal when the parking brake is fully applied, the stop lamp switch bracket could, in limited circumstances, be deformed by the driver’s foot during parking brake operation.
Depending on the amount of bracket deformation, this condition could cause the brake lights to remain on or, if the deformation is significant, the brakes could become partially engaged due to contact from the bracket, resulting in brake drag with associated brake noise, brake vibration, and/or illumination of the brake warning light. If this condition is not noticed and the vehicle continues to be driven, braking effectiveness could be reduced.
No other Toyota or Lexus vehicles are involved in this recall, and Toyota is not aware of any accidents or injuries related to this condition.
The stop lamp switch bracket is welded on to the left side of the brake pedal support assembly. The stop lamp switch provides a signal that indicates the brake pedal has been depressed and illuminates the brake lights.
Owners of the involved vehicles will receive an interim notification advising them of this recall by first class mail beginning in mid-January 2011, along with instructions for what to do if they experience this condition and how to minimize the possibility of inadvertently contacting the stop lamp switch bracket while operating the parking brake. Toyota will also post this information on its website.
Owners will receive a second notice by first class mail in approximately late February, once replacement parts become available, and asked to make an appointment with any Toyota dealer to have the remedy performed at no charge.
Toyota dealers will replace the bracket assembly, which includes the stop lamp switch bracket, with a new one that has been redesigned to take into account the proximity of the component to the parking brake pedal.
Detailed information and answers to questions are available to customers at www.toyota.com/recall
and the Toyota Customer Experience Center at 1-800-331-4331.
Safety and Quality Initiatives:
2011 Toyota Sienna Voluntary Recall:
Brake Master Cylinder Recall
2005-2008 Toyota Corolla/Corolla Matrix Voluntary Recall:
2000-2004 Toyota Avalon Voluntary Recall:
2003-2007 Lexus LX 470 Voluntary Recall:
2006-2008 Lexus IS 350/2007-2008 Lexus GS 350, GS 450h, LS 460, LS 460 L/2008 Lexus GS 460, LS 600h L Voluntary Recall:
2010 Lexus HS 250h Voluntary Recall:
2009-2010 Lexus LS 460 and LS 600h L Voluntary Recall:
2003 Toyota Sequoia Voluntary Recall:
2010 Lexus GX 460 Voluntary Recall:
1998-2010 Toyota Sienna Voluntary Recall:
2010 Tacoma Voluntary Recall:
2010 Prius/2010 Lexus HS 250h/Camry Voluntary Recalls:
Sticking Accelerator Pedal Recall:
Potential Floor Mat Interference with the Accelerator Pedal in Certain Toyota and Lexus Vehicles:
NOTE TO CONSUMERS: We’ve received a number of comments and questions about the floor mat issue and understand the safety concerns. We want to be responsive, but the Toyota USA Newsroom is not intended as a place for consumer complaints, or detailed information about any vehicle features, specs or capabilities. These types of concerns are best handled by our Customer Experience Center where they will be routed to the appropriate customer service representative for Toyota, Scion or Lexus. You can reach our customer service representatives by calling 1-800-331-4331. Prefer to email or chat? Simply access our website email or live chat links for Toyota, Scion or Lexus.